LAER
LC-50
LETHAL CONCENTRATION 50
LC-LO
LETHAL CONCENTRATION LOW
LCL
LOWER CONTROL LIMIT A line drawn at a calculated distance
below the
central line which represents the minimum variation which could
expected
only when normal cause of variation are present.
LCP
LIQUID CRYSTAL POLYMERS
LCPE
LOW-DENSITY POLYETHYLENE
LDR
LAND DISPOSAL RESTRICTIONS
LEL
LOWER EXPLOSIVE LIMIT
LEPC
LOCAL EMERGENCY PLANNING COMMITTEES
LESSONS LEARNED
A phrase coined by Joseph Juran to describe a structured approach
to analyzing past experience in an endeavor and applying the results
of that analysis to improving the quality of future efforts.
LEV
LOW EMISSION VEHICLES
LEVELING
The ability of a plating solution to produce a smooth and luster deposit with a lower
surface roughness than the original substrate.
LFG
LANDFILL GAS
LFM
LINEAR FEET PER MINUTE
LFW
LINEAR FRICTION WELDING
LIMITING CURRENT DENSITY
The maximum current density at which satisfactory deposit can be obtained. The current at
which the anode
dissolves normally without excess polarization.
LINE GRAPH
This graph is another way to visually display data for purposes of
comparison.
Specific items are entered by number and the data points are then
connected
by a line. Lines make trends and data variations over time easy to
track.
An excellent tool for highlighting change. Can be used for more than
one set of data at a time.
LIQUID MEASURE
4 GILLS = 1 PINT 2 PINTS = 1 QUART 4
QUARTS = 1 GALLON 31 1/2 GALLONS = 1 BARREL
LOAD
Any group of like parts ( in a barrel rack or other group
device ) put into a
tank at one time along with other similar or different parts.
LOC
LEVEL OF CONCERN
LOD
LIMIT OF DETECTION
LOM
LAMINATED OBJECT MANUFACTURING
LONG MEASURE
12 INCHES = 1 FOOT 3 FEET = 1 YARD 5
1/2 YARDS = 1 ROD 40 RODS = 1 FURLONG
8 FURLONGS = 1 STA. MILE 3 MILES = 1 LEAGUE
LOQ
LIMIT OF QUANTITATION
LOT
A defined quantity of items collected under uniform conditions for purpose of evaluation
or recording.
LPCVD
LOW-PRESSURE CHEMICAL VAPOR DEPOSITION
LPG
LIQUEFIED PETROLEUM GAS
LPMC
LOW-PRESSURE MOLDING COMPOUND
LPPS
LOW-PRESSURE PLASMA SPRAYING
LSL
LOWER SPECIFIED LIMIT
LSP
LICENSED STATE PROFESSIONALS
LT
LESS THAN
LTL
LESS THAN TRUCKLOAD
LULU
LOCALLY UNACCEPTABLE LAND USE